These options are available for this product:*
ohmic values out of range,special tolerance on resistance (2%, 1%)
*Options must be ordered separately. Contact Fairfild directly.
In what sectors is this resistance used?
The main areas of application are industrial automation, energy and railway sector.
For what types of applications is it used?
The product is used: as a dynamic terminating resistor, as a basic element in harmonic filter circuits, as a basic element for neutral earthing resistors, in RC circuits as the device for charging and discharging the capacitors and as a heating resistor for electrical panels.
What are the electrical specifications?
The RC family has 10 models with power ratings from 15 W to 300 W and the ohmic value ranges between 1.6 Ω and 91k Ω. The nominal voltage varies depending on the model.
What are the overload conditions?
The resistance can be overloaded with respect to its nominal power based on the working cycle (insertion and rest time). For duration pulse less than one second, the overload permissible also depends on the ohmic value. For non-repetitive pulses the relation is 5 times the nominal power for 10 seconds and 10 times the nominal power for 5 seconds.
What is the temperature of the resistance?
The temperature of the resistance depends on the power that it will dissipate. Numerous factors influence the dissipation capacity; please consult our technical data sheet for detailed information. The graph of the data sheet on page 3 shows the relationship between the temperature on the resistance and the power applied for a heating element placed horizontally.
The resistance can be mounted with its SC or SQ mounting brackets; in this regard, see the related products data sheet. For a better heat distribution we suggest mounting it horizontally. The TC clamp terminals in nickel-plated brass enable electrical connection via cable terminals or by tinning. On request (not to be purchased via e-commerce) it is possible to provide a male faston cable lead. If installed in a group, we recommend keeping a pitch equal to 2 times the diameter of the resistance.
SUPPORTO ISOLANTE SA/1 Diam. 30 x265
SUPPORTO SC 30 A
SUPPORTO SC 30 T
SUPPORTO SQ 30 A
SUPPORTO SQ 30 T