RCEN 1000

RCEN 1000

Elliptical shape, high surface load, very high impulse load and overload

The RCE HP is a wire resistance wound on a ceramic elliptical support coated with inorganic phosphate cement. The purpose of the coating is to (1) ensure the mechanical protection of the wire, (2) allow a uniform heat distribution and (3) limit thermal expansion of the coils. The coating does not have an electrical insulation function. The RCE HP is available in the low inductance version; in this case, it is called RCEN; it is available with an adjustment slider; in this case, it is called RCER; and with a fixed intermediate socket, in this case, it is called RCEP. The latter cannot be purchased through e-commerce, please contact our sales department: sales@dev.fairfild.com. Compared to the lower power RCE family (31 W to 91 W), this family is very different in size and electrical characteristics. It also provided for the version with mica guide bar to increase the isolation level, for the purchase please contact our sales department.

Overview Table

Min Resistance
7.5
Max Resistance
1000
Tolerance (%)
±5%
Rated Continuos Power (W)
1000
Protection Degree (IP)
IP00
Not Inductive
Yes
Rated insulation voltage (V)
(Clarification on Voltage definitions.pdf)
3000
Adjustable
no
Thermal switch
no
UL
no
Weight
1.5

HELP DESK

Our customer service is always available to help you choose the product that best suits your needs.

+39 02 48407171