Home » Catalog » RSAR 200

RSAR 200

Cross Reference

RSAR 200

Submerged collars, designed for severe environment condition

The RSA is a wire resistance wound on a ceramic tubular support coated with vitreous enamel with clamps beneath the coating. The purpose of the coating is to (1) ensure the mechanical protection of the wire, (2) allow a uniform heat distribution and (3) limit thermal expansion of the coils. The coating does not have an electrical insulation function. Vitreous enamel ensures total waterproofing of resistance. The RSA is available in the low inductance version; in this case, it is called RSAN; it is available with an adjustment slider; in this case, it is called RSAR; and with a fixed intermediate socket, in this case, it is called RSAP. The latter cannot be purchased through e-commerce, please contact our sales department: sales@dev.fairfild.com.

Overview Table

Min Resistance
27
Max Resistance
91000
Tolerance (%)
+15%
Rated Continuos Power (W)
200
Protection Degree (IP)
IP00
Not Inductive
No
Maximum operating voltage permanent (V)
2500
Adjustable
Yes
Thermal switch
No
UL
No
Weight
0.235

These options are available for this product:*

ohmic values out of range,special tolerance on resistance (2%, 1%) *Options must be ordered separately. Contact Fairfild directly.

In what sectors is this resistance used?

The main areas of application are industrial automation, energy and railway sector.

For what types of applications is it used?

The product is used: as a dynamic terminating resistor, as a basic element in harmonic filter circuits, as a basic element for neutral earthing resistors, as a resistance to start up motors, as a charge and discharge capacitor resistance in RC as heating resistances for electrical or anti condensation panels.

What are the electrical specifications?

The RSA family has 13 models with power ratings from 25 W to 300 W and the ohmic value ranges between 3 Ω and 91k Ω. The nominal voltage varies depending on the model.

What are the overload conditions?

The resistance can be overloaded with respect to its nominal power based on the working cycle (insertion and rest time). For duration pulse less than one second, the overload permissible also depends on the ohmic value. For non-repetitive pulses the relation is 5 times the nominal power for 10 seconds and 10 times the nominal power for 5 seconds.

What is the temperature of the resistance?

The temperature of the resistance depends on the power that it will dissipate. Numerous factors influence the dissipation capacity; please consult our technical data sheet for detailed information. The graph on page 3 of the data sheet shows the relationship between the temperature on the resistance and the power applied for a heating element placed horizontally.
The resistance can be mounted with its SC or SQ mounting brackets; in this regard, see the related products data sheet. For a better heat distribution we suggest mounting it horizontally. The terminals made in nickel-iron alloy enable electrical connection through tinning. On request (not to be purchased via e-commerce) it is possible to provide a male faston cable lead. If installed in a group, we recommend keeping a pitch equal to 2 times the diameter of the resistance.
DOWNLOAD PDF: DOWNLOAD STP FILE: RCAR 200.zip
SUPPORTO SC 30 A
SUPPORTO SC 30 T
SUPPORTO SQ 30 A
SUPPORTO SQ 30 T

HELP DESK

Our customer service is always available to help you choose the product that best suits your needs.

+39 02 48407171