These options are available for this product:*
ohmic values out of range,special tolerance on resistance
*Options must be ordered separately. Contact Fairfild directly.
In what sectors is this resistance used?
The main areas of application are industrial automation and the railway sector.
For what types of applications is it used?
The product is used: as a dynamic braking resistor, as motor starting resistance and as protection from surges.
What are the electrical specifications?
The RNT family provides for 9 models with power ratings from 457 W to 2804 W depending on the strip used. The ohmic value varies from 0.051 Ω to 4.27 Ω. The maximum voltage of use is 600 V for RNT 2,3,4,5,6 and 1000 V for RNT 700, 900, 1000, 1100.
What are the overload conditions?
The resistance can be overloaded with respect to its nominal power based on the working cycle (insertion and rest time). For duration pulse less than one second, the overload permissible also depends on the ohmic value.
What is the temperature of the resistance?
The temperature of the resistance depends on the power that it will dissipate and on the ohmic value. The first page of the data sheet gives the surface load data for some of the strips. Other factors influence the dissipation capacity, please consult our technical data sheet for detailed information.
Resistance is normally assembled in groups via rods and ceramic spacer bushings. The terminals in stainless steel are suitable for connection via cable terminals. If installed in a group we recommend keeping a distance between the resistances of at least 60 mm.