RSAR 90

More Views

Picture in this page may not represent exactly the product

RSAR 90

In stock

Enamelled wire resistor
The RSA is a wire resistance wound on a ceramic tubular support coated with vitreous enamel with clamps beneath the coating. The purpose of the coating is to (1) ensure the mechanical protection of the wire, (2) allow a uniform heat distribution and (3) limit thermal expansion of the coils. The coating does not have an electrical insulation function. Vitreous enamel ensures total waterproofing of resistance. The RSA is available in the low inductance version; in this case, it is called RSAN; it is available with an adjustment slider; in this case, it is called RSAR; and with a fixed intermediate socket, in this case, it is called RSAP. The latter cannot be purchased through e-commerce, please contact our sales department: sales@fairfild.com.
Price From: €8.52
Price From: €8.52

* Required Fields

Price From: €8.52
RSAR 90 is available for purchase in increments of 10

Additional Information

Delivery (days)30
Tolerance (%)15
Rated continuous power (W)90
Protection degree (IP)IP00
Not-inductiveNo
Maximum operating voltage (V)1800
AdjustableYes
ThermostatNo
ULNo
For this product are available these options:*
  • ohmic values out of range
  • special tolerance on resistance (2%, 1%)
*Options must be ordered separately, please contact Fairfild
1. In what sectors is this resistance used?
The main areas of application are industrial automation, energy and railway sector.
2. For what types of applications is it used?
The product is used: as a dynamic terminating resistor, as a basic element in harmonic filter circuits, as a basic element for neutral earthing resistors, as a resistance to start up motors, as a charge and discharge capacitor resistance in RC as heating resistances for electrical or anti condensation panels.
1. What are the electrical specifications?
The RSA family has 13 models with power ratings from 25 W to 300 W and the ohmic value ranges between 3 Ω and 91k Ω. The nominal voltage varies depending on the model.
2. What are the overload conditions?
The resistance can be overloaded with respect to its nominal power based on the working cycle (insertion and rest time). For duration pulse less than one second, the overload permissible also depends on the ohmic value. For non-repetitive pulses the relation is 5 times the nominal power for 10 seconds and 10 times the nominal power for 5 seconds.
3. What is the temperature of the resistance?
The temperature of the resistance depends on the power that it will dissipate. Numerous factors influence the dissipation capacity; please consult our technical data sheet for detailed information. The graph on page 3 of the data sheet shows the relationship between the temperature on the resistance and the power applied for a heating element placed horizontally.
1. How must I install the product?
The resistance can be mounted with its SC or SQ mounting brackets; in this regard, see the related products data sheet. For a better heat distribution we suggest mounting it horizontally. The terminals made in nickel-iron alloy enable electrical connection through tinning. On request (not to be purchased via e-commerce) it is possible to provide a male faston cable lead. If installed in a group, we recommend keeping a pitch equal to 2 times the diameter of the resistance.
Power resistors schema