RS TC 220
Enamelled wire resistorThe RS is a wire resistance wound on a ceramic tubular support coated with vitreous enamel. The purpose of the coating is to (1) ensure the mechanical protection of the wire, (2) allow a uniform heat distribution and (3) limit thermal expansion of the coils. The coating does not have an electrical insulation function. Vitreous enamel ensures total waterproofing of resistance. The collar termination is called TC, while the band terminal is called TS. The RS is available on the website in the low inductance version; in this case, it is called RSN; it is available with an adjustment slider; in this case, it is called RCR; and with a fixed intermediate socket, in this case, it is called RCP. The latter cannot be purchased through e-commerce, please contact our sales department: firstname.lastname@example.org.
Price From: €10.94
|Rated continuous power (W)||220|
|Protection degree (IP)||IP00|
|Maximum operating voltage (V)||3000|
1. In what sectors is this resistance used?
The main areas of application are industrial automation, energy and railway sector.
2. For what types of applications is it used?
The product is used: as a dynamic terminating resistor, as a basic element in harmonic filter circuits, as a basic element for neutral earthing resistors, as a resistance to start up motors, as a charge and discharge capacitor resistance in RC as heating resistances for electrical or anti condensation panels.
1. What are the electrical specifications?
The RS family has 10 models with power ratings from 15 W to 300 W and the ohmic value ranges between 1.6 Ω and 91k Ω. The nominal voltage varies depending on the model.
2. What are the overload conditions?
The resistance can be overloaded with respect to its nominal power based on the working cycle (insertion and rest time). For duration pulse less than one second, the overload permissible also depends on the ohmic value. For non-repetitive pulses the relation is 5 times the nominal power for 10 seconds and 10 times the nominal power for 5 seconds.
3. What is the temperature of the resistance?
The temperature of the resistance depends on the power that it will dissipate. Numerous factors influence the dissipation capacity; please consult our technical data sheet for detailed information. The graph on page 3 of the data sheet shows the relationship between the temperature on the resistance and the power applied for a heating element placed horizontally.
1. How must I install the product?
The resistance with the TC type clamp terminals can be mounted with the relative SC or SQ support brackets; the TF type band terminals can be mounted on SM type supports. In this regard, see the related product data sheets. For a better heat distribution we suggest mounting it horizontally. The TC collar terminals in nickel-plated brass enable electrical connection via cable terminals or by tinning. On request (not to be purchased via e-commerce) it is possible to provide a male faston cable lead. Other types of terminals can be viewed on our data sheets. If installed in a group, we recommend keeping a pitch equal to 2 times the diameter of the resistance.