RNP 1200

More Views

Picture in this page may not represent exactly the product

RNP 1200

In stock

Plate resistor wound edgeways
The RNP is a resistance with strip wrapped edgeways on ceramic U-bolts mounted on a metal rod. Thanks to this construction the thermal resistance is very low: the strip is in fact free to exchange heat with the surrounding air very effectively. Even in terms of the heat capacity the RNP ensures very high performances. The RNP series does not provide default ohmic values or predetermined resistive alloys. Only the length of the bar is fixed. For this reason, you must contact the sales department to request a special quotation: sales@fairfild.com.

* Required Fields

RNP 1200 is available for purchase in increments of 1

Additional Information

Delivery (days)15
Tolerance (%)10
Rated continuous power (W)2800
Protection degree (IP)IP00
Maximum operating voltage (V)1500
For this product are available these options:*
  • ohmic values out of range
  • special tolerance on resistance (2%, 1%)
*Options must be ordered separately, please contact Fairfild
1. In what sectors is this resistance used?
The main areas of application are industrial automation and the railway sector.
2. For what types of applications is it used?
The product is used: as a dynamic braking resistor, as motor starting resistance and as protection from surges.
1. What are the electrical specifications?
The RNP family provides for 3 models with power ratings from 800 W to 4400 W depending on the strip used. The ohmic value varies from 0.1 Ω to 4.3 Ω. The maximum voltage of use is 1500 V.
2. What are the overload conditions?
The resistance can be overloaded with respect to its nominal power based on the working cycle (insertion and rest time). For duration pulse less than one second, the overload permissible also depends on the ohmic value.
3. What is the temperature of the resistance?
The temperature of the resistance depends on the power that it will dissipate and on the ohmic value. The first page of the data sheet gives the surface load data for some of the strips. Other factors influence the dissipation capacity, please consult our technical data sheet for detailed information.
1. How must I install the product?
Resistance is normally assembled in groups via rods and ceramic spacer bushings. The terminals in stainless steel are suitable for connection via cable terminals. If installed in a group we recommend keeping a distance between the resistances of at least 30 mm.
Schema non disponibile.