RFP/V FT 400
resistor in aluminium caseThe RFP is a wire resistance wound on a mica cement coated plate, immersed in quartzite sand and placed in an anodized aluminium casing. Sealing is done through dielectric cement. The cables are made of PTFE. The RFP resistance exists in the Vertical version (RFP/V) and the horizontal version (RFP/H). Only the version marked UL can be purchased. Other versions available are those with thermostat, (RFP T) those with built-in fuse (RFP F) and the version with thermostat and fuse (RFP FT).
Price From: €44.27
|Rated continuous power (W)||250|
|Protection degree (IP)||IP65|
|Maximum operating voltage (V)||1000|
1. In what sectors is this resistance used?
The main areas of application are industrial automation, energy and railway sector.
2. For what types of applications is it used?
The product is used: as a dynamic braking resistor, as motor starting resistance such as charging and discharging resistance in the condensers in RC circuits.
1. What are the electrical specifications?
The RFP family has 8 models with power ratings from 200 W to 470 W and the ohmic value ranges between 1 Ω and 820 Ω. The maximum voltage of use is 1000 V.
2. What are the overload conditions?
The resistance can be overloaded with respect to its nominal power based on the working cycle (insertion and rest time). For duration pulse less than one second, the overload permissible also depends on the ohmic value. For pulses of longer duration, the internal quartzite plays a decisive role in dissipating energy. See the section on overloads in the data sheet.
3. What is the temperature of the resistance?
The temperature of the resistance depends on the power that it will dissipate. Numerous factors influence the dissipation capacity; please consult our technical data sheet for detailed information. The graph on page 2 of the data sheet shows the relationship between the temperature on the casing and the power applied for a heating element placed horizontally. The resistance in the vertical version (RFP/V) is able to dissipate more power than the horizontally positioned resistance.
1. How must I install the product?
The resistance can be installed horizontally or vertically, in this case it is necessary that the cables are facing downwards. For mounting, use the 2 slots available. The provided cable that has not been stripped is used for electrical connection. There is no hole for the earth connection. The case is provided anodized.
Schema non disponibile.